|
|
|
|
|
Wooden Gear Clock Plans |
Got a scroll saw? Then you can make your wooden gear clock completely from scratch with our Plan and Hardware Pack. If you want us to include all the materials as well, we offer the Plan and Material Pack. We also now offer our Plan and Gear Set if you would like to cut all pieces except for the gears.
|
| What our customers are saying about our plans. . .
"I hung the clock on the wall and it started right away and ran just beautiful! I must compliment you on a great design job and excellent plans and instructions! They were obviously very well thought through and presented! By far the best I have seen."
"I have to compliment you on your plans and the way you have so clearly laid them out and your step by step instructions."
"I got the plans yesterday. And WOW! The detailing is great. I can not wait to get started."
"Wonderful plans and easy to follow!! I had never used a scroll saw before but the plans and the customer support made it a invigorating experience."
| |
| |
|
| |
Plan and Hardware Pack
- Full size patterns of all components
- Complete assembly instruction manual
- Hardware pack (nylon washers, screws, brass hook, and string)
Crescent: $19 + $4 s/h 
Ascent: $19 + $4 s/h
Serpentine: $19 + $4 s/h |
|
| |
Plan and Material Pack
- Plan and Hardware Pack (patterns, instructions, hardware pack)
- Three (Crescent four) 12"x30" 1/4" Baltic Birch plywood
- One 12"x10" 1/8" Baltic Birch plywood
- Two pendulum shaft pieces with splice joint precut (Serp/Asc only)
- 30" of 1/4" hardwood dowel
- 3" of 3/8" hardwood dowel (Ascent only)
Crescent: $44 + $14 s/h
Ascent: $39 + $14 s/h
Serpentine: $39 + $14 s/h
|
|
| |
Plan and Gear Set
- Plan and Hardware Pack (patterns, instructions, hardware pack)
- Laser cut gears, escape lever, and several circular pieces
Crescent: $65 + $10 s/h
Ascent: $65 + $10 s/h
Serpentine: $65 + $10 s/h
|
|
| |
Plan and Gear Set With Materials
- Plan and Hardware Pack (patterns, instructions, hardware pack)
- Laser cut gears, escape lever, and several circular pieces
- Two (Crescent three) 12"x30" 1/4" Baltic Birch plywood
- One 12"x10" 1/8" Baltic Birch plywood
- Two pendulum shaft pieces with splice joint precut (Serp/Asc only)
- 30" of 1/4" hardwood dowel
- 3" of 3/8" hardwood dowel (Ascent only)
Crescent: $84 + $14 s/h
Ascent: $79 + $14 s/h
Serpentine: $79 + $14 s/h
|
|
|
| |
